Name : david
Time : 6/6/2012 2:48:06 PM
Title : What should pay attention to when jaw crusher is used in the production?
Question :

What should pay attention to when jaw crusher is used in the production?

Categories : Crusher Series
Reply :

1. After crusher is in normal operation, then feed production.
2. Broken material should be added evenly crusher cavity, lateral feeding should be avoided or filled with feeding, so as not to overload or under unilateral overload.
3. Normal operation, the bearing temperature rise should not exceed 30 ℃, the maximum temperature not exceeding 70 ℃. Over the temperature should immediately stop and identify the cause and to be eliminated.
4. Before parking, you should first stop feeding until the crushing cavity material is fully discharged only after the power off.
5. Broken when the material as a result of crushing cavity caused by parking congestion, immediately turn off the power to stop running, clean up the broken cavity material, before re-starting.
6. Turn it around one end of jaw plate after wearing down.
7. Jaw crusher should bear the damage to the machine set loose sleeve after using for a time.

Question: