NEWS
- Company News
- Kefid's impact crusher models
- Kefid single-cylinder hydraulic
- The equipment configuration and
- The future development of minin
- K series tire mobile crusher
- Bauma China 2020: Three new pro
- Basalt sand and gravel producti
- The crushing mechanism of impac
- The use of coal gangue and crus
- 325 mesh calcium carbonate powd
- Industry News
- The maintenance measures that i
- The standard of mechanism sand
- The technological processes of
- The technical advantages of Eur
- Concrete blocks recycling to bu
- A powerful tool for processing
- Stone crusher for railway proje
- The selection of crushing cavit
- The advantages of mobile sand m
- The solution to prevent corrosi
- Exhibition
- Special Report
- Faq
- How to maintain the production
- How to configure equipment for
- The composition of cement raymo
- I want to buy a coal mill with
- What equipment is needed for th
- What are the complete sets of e
- Regarding the waste disposal af
- What is the price of sand washe
- How much are the accessories of
- What is the reason for the slow
How to do the daily maintenance of the vertical mill?
Asker: JosephineAsk date: 10/30/2018 09:21:27AM
Question: How to do the daily maintenance of the vertical mill?
Reply:
Dear Josephine,
The vertical mill is a large-scale powder processing equipment, focusing on three major fields of non-metallic minerals, coal powder and slag. It is a general-purpose mill used in the field of powder processing. We should do daily maintenance for vertical mill as following:
1. Strictly observe the operating system
In the normal operation process, the operator needs to strictly abide by the rules and regulations of the "Technical Operation Procedures for Vertical Mills", record the operating parameters, adjust the operating parameters of the mill according to the regulations and ensure that the mill is in a good running condition.
2. Fill the lubricant as required
In normal production, the operator needs to check the lubrication effect of each component. Every week, it is necessary to add lubricating oil to each lubrication point of the vertical mill to ensure the normal operation of the equipment. If you find a problem, you should deal with it in time.
3. Ensure the pressure gauge of the hydraulic station is accurate
The hydraulic pipeline can not withstand various external pressures. In winter, it is necessary to replace the winter hydraulic oil. In normal times, the pressure gauge should be flexible and accurate, and the anti-corrosion treatment should be done well.
4. Ensure that the oil station has sufficient oil
The thin oil station requires cleaning the oil filter once every three months. It is necessary to check the quality of the lubricating oil and find if the impurities are high.
5. Check the screw fastening
The tightening of the screws needs to be checked regularly every week.If you find problems,it need to be repaired and replaced in time.
6. Keep the equipment clean
When the equipment stops working, it is necessary to do a good cleaning work to ensure the overall cleaning of the mill so as to ensure the service life of the equipment.
Regards!
Kefid
Kefid